Free Web Hosting Provider - Web Hosting - E-commerce - High Speed Internet - Free Web Page
Search the Web

 

PERFORMANCE T3-SERIES TURBOCHARGERS

Performance T3 Turbo
  • Ceramic Ball Bearing Option
  • Backplates
  • Bearing Housings
  • Turbine Housings

  • Available in any combination of compressor trim (including the exclusive SUPER 60) and turbine section in standard, Stage II or Stage III turbine wheel trim. (as shown below) The T3-series gives you the choice of wet or dry bearing housing and dynamic or carbon seal. “BLUEPRINTED” ASSEMBLY IS STANDARD. With airflow ratings from 150 HP to 325 HP the PERFORMANCE T3-SERIES is ideal for small displacement engines. Basic unit does not include wastegate- please see “installation accessories”, listed below.

    FOR SPECIFIC APPLICATION RECOMMENDATIONS, CONTACT US.

    PN 10565 PERFORMANCE T3 TURBOCHARGER
    except super 60
    PN 10566 SUPER 60 TURBOCHARGER.
    PN 10567 PERFORMANCE T3 CHRA.
    PN 10568 SUPER 60 CHRA.
    PN 10672 Polished Compressor Housing Option.

    NOTE: WHEN ORDERING PART NUMBERS ABOVE, YOU MUST SPECIFY;
    WET OR DRY BEARING HOUSING, DYNAMIC OR CARBON SEAL, COMPRESSOR AND TURBINE TRIM.

    TURBINE HOUSINGS
    A/R STANDARD TRIM STAGE II TRIM STAGE III TRIM
    .36 PN 20369-72 PN 20369-02 PN 20369-03
    .48 PN 20357-72 PN 20357-02 PN 20357-03
    .63 PN 20358-72 PN 20358-02 PN 20358-03
    .82 PN 20359-72 PN 20359-02 PN 20359-03

    NOTE: All Performance T3 Series turbine housing of the same trim are physically interchangeable. (Identical pattern to late Ford 2.3L Garrett).

    COMPRESSOR TRIM COMP. HOUSING COMP. WHEEL
    40 PN 20372 PN 20267
    45 PN 20373 PN 20263
    50 PN 20374 PN 20268
    60 PN 20375 PN 20272
    SUPER 60 PN 20376 PN 20324

    3” INLET AVAILABLE ON T3-SERIES !

    Turbine Wheel/Shaft
    TURBINE WHEEL/SHAFT
    STANDARD TRIM STAGE II TRIM STAGE III TRIM
    PN 20279 PN 30361 PN 30310

    PERFORMANCE T3 INSTALLATION ACCESSORIES

    T3 Installation Accesories PN 20365 T3 Turbine inlet weld flange
    PN 30263 T3 Turbine inlet gasket
    PN 20367 T3 Turbine discharge weld flange
    PN 30298 T3 Swing valve assembly
    PN 20368 T3 Swing valve discharge flange
    PN 30314 T3 Adjustable swing valve actuator, single port
    PN 30326 T3 Adjustable swing valve actuator, dual port